Do you find that the current TV is thinner and thinner, and the larger the resolution is getting higher and higher, but the sound quality of the TV has no qualitative leap. I always feel that the volume is not large and the sound quality is not good. The bass is not obvious. This is why the TV is thin. The fuselage is so thin and the speaker is nowhere to be placed.

Therefore, many people now consider buying another set of professional audio equipment to solve the problems of poor sound quality and high frequency. But how does professional audio equipment connect to TV? Many people do not know how to connect professional audio and TV. Now take the 5.1 audio system as an example to teach a set of practical tutorials to everyone.

First determine the location of the speaker according to the listening environment and the layout of the sofa. Professional audio equipment 5.1 system includes left, right loudspeaker, middle speaker, left and right surround speakers, and bass guns. The left and right main expansion is installed on both sides of the TV; the mid -set speaker is placed in the middle, usually under the TV; the left and right are around the left and right ends of the backcourt of the room; the location of the bass gun has no special requirements. Essence

After the speaker location is determined, the hanging hanging is installed, the angle is adjusted, and then connecting the sound speaker wire. The wire card is tight; the active subwoofer can be directly connected to the amplifier with the signal line of the lotus head.

After the speaker end line is connected, it is necessary to wiring the power amplifier. There are 5 sound output on the amplifier, which corresponds to the left, middle and right, and 5 speakers around, and the source bass output corresponds to the subwoofer. After the connection, you need to connect the signal. Connect the high -definition TV box, DVD, hard disk player and other players to the HDMI input of the amplifier, connect from the power amplifier's HDMI output to the TV.

However, you must buy the active speaker. Connect the audio signal with the active speaker to the AV output of the AV output at the back of the TV back. In this regard, you must buy the audio cable or conversion plug that is a red and white lotus plug.